Print Page - Help with First SetUp

Title: Help with First SetUp
Post by: jamie.a on October 03, 2023, 09:37:33 PM

Hi All, hoping for some help here.... I have this setup working on pfSense atm but bought new kit and swithcing to OpnSense.

6 x Physical 2.5gbps ports

LAN = 10.0.1.1/24 VLAN1
KIDS = 10.0.6.1/24 VLAN6
DMZ = 10.0.10.1/24 VLAN10
GUEST = 10.0.20.1/24 VLAN20
IoT = 10.0.30.1/24 VLAN30

PORT0 = WAN
PORT1&2 = LAAG0 (Switch Uplink = All VLANS)
PORT3&4 = LAAG1 (NAS Uplink = VLAN10)
PORT5 = Server (VLAN10)

I need LAAG1 & PORT5 on the DMZ VLAN. I want to do it this way as 2.5gbps managed switches are expensive and i don't really want +2 subnets for the Storage & Server. Plus this should allow the Server more bandwidth to the NAS (used to be 1gpbs).

I've probably not explained it very well here lol.

Title: Re: Help with First SetUp
Post by: Patrick M. Hausen on October 03, 2023, 09:48:35 PM

And your question is ...?

Title: Re: Help with First SetUp
Post by: jamie.a on October 03, 2023, 09:52:16 PM

Not sure how to get the Port3-5 on DMZ VLAN and Zone.

"PORT3&4 = LAAG1 (NAS Uplink = VLAN10)
PORT5 = Server (VLAN10)"

Title: Re: Help with First SetUp
Post by: Patrick M. Hausen on October 03, 2023, 09:53:28 PM

Use a LAN bridge.

https://docs.opnsense.org/manual/how-tos/lan_bridge.html

Title: Re: Help with First SetUp
Post by: jamie.a on October 03, 2023, 10:00:54 PM

Sorry, i'm being abit thick here.

This is what i currently have.... I have no idea of next steps. (It's been an age since i setup pfSense)

Title: Re: Help with First SetUp
Post by: jamie.a on October 03, 2023, 10:50:42 PM

Like this?

OPNsense Forum

English Forums => General Discussion => Topic started by: jamie.a on October 03, 2023, 09:37:33 PM