Hi,
after working for quite a long time, zenamor has stopped working for me some weeks ago following the latest major update. What essentially happens is nothing. While I can have a look at open web/dns/tls/... sessions (so it appears to be intercepting traffic), nothing is blocked or "protected" at all anymore.
The best guess I have about this is because in the new configuration my wan interface em0 is missing, see the attached screenshots.
Any ideas?
Hi daudo,
By default WAN interface or default gateway interface of the firewall is not displayed on the Zenarmor configuration page, so you cannot choose to secure them.
For more information:
https://www.zenarmor.com/docs/troubleshooting/configuration#wan-interface-not-detected
Could you verify/confirm that filtering is not working on your LAN interface?
If not, you may share your log and config files by clicking on Send Feedback link.
https://www.zenarmor.com/docs/support/reporting-bug#as-of-v114
Bests
Hi Beki,
thanks for the information. I wasn't aware that the WAN interface wouldn't be shown on purpose and subsequently didn't really check the new config UI, because I thought that all my issues were due to the "missing" interface.
However, after checking the available config options, it seems that I simply didn't configure any blocks and after enabling them, everything works now.
Thanks again!