OPNsense Forum

Archive => 23.7 Legacy Series => Topic started by: poupin on September 25, 2023, 12:12:35 PM

Title: After update to 23.7.4 getting LOGIN FAILURES ON ttyU0
Post by: poupin on September 25, 2023, 12:12:35 PM
After update from 23.7.3 to 23.7.4 I'm getting within about each ~1 minutes following messages to system log:

2023-09-25T11:44:01
[Notice]
login   2 LOGIN FAILURES ON ttyU0, Scanned 4 Networks...
2023-09-25T11:43:47
[Notice]
login   2 LOGIN FAILURES ON ttyU0, Startup/Boot....
2023-09-25T11:39:01
[Notice]
login   2 LOGIN FAILURES ON ttyU0, Scanned 4 Networks...
2023-09-25T11:38:47
[Notice]
login   2 LOGIN FAILURES ON ttyU0, Startup/Boot....

Do you have idea what could be broken? How to mitigate such issue?

Thank you in advance for any hint, Martin
Title: Re: After update to 23.7.4 getting LOGIN FAILURES ON ttyU0
Post by: axsdenied on September 25, 2023, 08:15:32 PM
I believe those are console errors.  Do you have a serial connection or usb based serial connection connected to it?
Title: Re: After update to 23.7.4 getting LOGIN FAILURES ON ttyU0
Post by: poupin on September 26, 2023, 08:04:49 AM
Thank you for the hint!
it seems it was caused by connected ESP32 device (used for control of Somfy devices) which was connected to router via USB (but just for powering) and this was done same time as was performed the upgrade ;-).
It helps to have unchecked "Use USB-based serial ports" in System: Settings: Administration.