OPNsense Forum

English Forums => Tutorials and FAQs => Topic started by: arvendui on September 17, 2023, 07:50:32 PM

Title: Dual Stack he.net Custom POST protocol on OPNsense 23.7.4
Post by: arvendui on September 17, 2023, 07:50:32 PM
Version 1: 9/17/2023

Because it's free and after bloodying my forehead for a weekend, this method seems to work flawlessly with he.net's Dynamic DNS Service for my dual stack set up.

(https://ficke.org/dualstack6.png)

This guide describes one approach to utilize the os-ddclient native backend to facilitate updating he.net DDNS on a dual-stack network with the Custom Post protocol option. Thank you to DaCookie4u!

(https://ficke.org/dualstack2.png)

Install os-ddclient plugin (Dynamic DNS)

(https://ficke.org/dualstack7.png)

Configure Services / Dynamic DNS / Accounts (two accounts required, one for each ip stack)

IPv6


(https://ficke.org/dualstack3.png)

IPv4


Important: When utilizing he.net's Free DNS Service, Usernames (which is yourdomain.com), Hostnames (also yourdomain.com), and Passwords (keys) are identical for both IPv6 & IPv4. When you change either A or AAAA record keys for an identical hostname, you change both record keys. (https://dns.he.net/docs.html (https://dns.he.net/docs.html))

(https://ficke.org/dualstack5.png)

When you get done with that, you should see something like this, but likely less blurry  ;)

(https://ficke.org/dualstack1.png)

Configure Services / Dynamic DNS / Settings / General Settings


(https://ficke.org/dualstack4.png)

Nirvana!

(https://ficke.org/dualstack8.png)