OPNsense Forum

English Forums => General Discussion => Topic started by: ajoeiam on August 31, 2023, 11:04:36 PM

Title: Can't access the gui
Post by: ajoeiam on August 31, 2023, 11:04:36 PM
Greetings

Long story short I had to move to a new isp today.

Shifted the old router to 192.168.1.3

Machine I have opnsense 23.1 installed on is saying that its at 192.168.1.1   

I cannot log into 192.168.1.1

ping 192.168.1.3  gives pings like in the past
ping 192.168.1.1  gives : Destination host unreachable

on the console (with opnsense 23.1) selecting option 7 (ping host)
gives 3 pings and the stats

how do I log into the gui to complete the configuration?

TIA
Title: Re: Can't access the gui
Post by: meyergru on August 31, 2023, 11:55:58 PM
Obviously, there is no network connectivity although the new box says the interface is working. Maybe you chose the wrong interface to connect to your LAN?
Title: Re: Can't access the gui
Post by: ajoeiam on September 01, 2023, 12:50:02 AM
Thank you for your response.

Checked the cabling for perhaps the 10th time - - - if connected into the rj-45 port.
Its an Intel 225 something or other port - - - does that make a difference?

(The WAN or ue0 port is a USB to RJ-45 converter - - - - according to freebsd its the version that works - - - not a realtek.)

If only I could have access to the web without my present router. Then I could investigate with the system set up and no previous router in the queue.