Print Page - Default deny / state violation rule blocking traffic to reverse proxy.

Title: Default deny / state violation rule blocking traffic to reverse proxy.
Post by: sierra117 on August 24, 2023, 12:43:08 AM

Hi all,

I'm having an issue where the default deny / state violation rule is blocking traffic from WAN to my reverse proxy (traefik).

(https://i.imgur.com/Eeo2HpD.png)

In the image you can see that the rule is blocking my phone, on the cell network, from being directed to my reverse proxy IP.

My WAN rules are: (https://i.imgur.com/zzKMVgG.png)

My LAN rules are: (https://i.imgur.com/cgwwxd0.png)

What am I missing here? Why is this traffic getting blocked? I have reset my state table and I'm still having issues.

Title: Re: Default deny / state violation rule blocking traffic to reverse proxy.
Post by: sierra117 on August 24, 2023, 12:59:20 AM

These are my port forward rules as well.

(https://i.imgur.com/JHKMcx2.png)

Title: Re: Default deny / state violation rule blocking traffic to reverse proxy.
Post by: sierra117 on August 24, 2023, 04:10:34 AM

I figured it out.

I had to go into my port forwards and set filter rule association to automatic

OPNsense Forum

Archive => 23.1 Legacy Series => Topic started by: sierra117 on August 24, 2023, 12:43:08 AM