Print Page - Detected hardware but not showing up on interface

Title: Detected hardware but not showing up on interface
Post by: opnbutopn on August 08, 2023, 01:26:21 PM

Hello,

My setup is like this.

OPNsense 23.7-amd64
FreeBSD 13.2-RELEASE-p1
OpenSSL 1.1.1u 30 May 2023

none1@pci0:2:0:0: class=0x028000 rev=0x00 hdr=0x00 vendor=0x14e4 device=0x4359 subvendor=0x14e4 subdevice=0x0545
vendor = 'Broadcom Inc. and subsidiaries'
device = 'BCM43228 802.11a/b/g/n'
class = network

I did a pciconf -lv and the device is there. But I can't seem to see it in the interface itself as a NIC.

Anything I need to do here?

Title: Re: Detected hardware but not showing up on interface
Post by: Patrick M. Hausen on August 08, 2023, 01:49:20 PM

Wireless does not appear as an interface in FreeBSD unless it is set up which creates the wlan0 interface etc. Support in OPNsense is very limited.

https://docs.opnsense.org/manual/how-tos/interface_wireless_internal.html

OPNsense Forum

English Forums => Hardware and Performance => Topic started by: opnbutopn on August 08, 2023, 01:26:21 PM