OPNsense Forum

Archive => 23.1 Legacy Series => Topic started by: mman2000 on July 19, 2023, 10:33:54 PM

Title: Updated from 23.1 to 23.1.11 lost internet connection
Post by: mman2000 on July 19, 2023, 10:33:54 PM
I updated from 23.1 to 23.1.11 and my lost internet connection. I am trying to work though why. Everything seems to be set up correctly. I am not sure what is going on. 
Title: Re: Updated from 23.1 to 23.1.11 lost internet connection
Post by: Patrick M. Hausen on July 19, 2023, 10:37:58 PM
This is by far too little information to give any meaningful advice.

For a start please describe your Internet connection. Is it Ethernet with static addresses? DHCP? Is there an ISP modem? Is PPPoE used? Etc ...
Title: Re: Updated from 23.1 to 23.1.11 lost internet connection
Post by: mman2000 on July 19, 2023, 10:39:19 PM
Static IP from my ISP no DHCP from provider. I had to manual enter IP. I have a fiber modem from ISP.

Ethernet with static addresses and DHCP. No PPPoE. Ethernet is not the issue. My OPNsense box cannot connect to the WAN at all. But I do have Ethernet I think.

Everything was running I clicked upgrade an now no connection.
Title: Re: Updated from 23.1 to 23.1.11 lost internet connection
Post by: Patrick M. Hausen on July 19, 2023, 10:49:56 PM
What does the interface summary show? Can you ping your ISPs default gateway?
Title: Re: Updated from 23.1 to 23.1.11 lost internet connection
Post by: mman2000 on July 20, 2023, 12:10:48 AM
Quote from: Patrick M. Hausen on July 19, 2023, 10:49:56 PM
What does the interface summary show? Can you ping your ISPs default gateway?

I cannot ping the ISPs default gateway. It is showing red.

In the firewall log I am seeing. default deny / state violation rule
Title: Re: Updated from 23.1 to 23.1.11 lost internet connection
Post by: mman2000 on July 20, 2023, 01:07:10 AM
I fixed it

1: I unchecked Disable Gateway Monitoring in the gateway settings.

2: Somehow the dpinger Gateway Moniter (staticIp) service was turned off. I turned it on.

3: I checked Disable Gateway Monitoring in the gateway settings.


After I turned it on it now does not even show up in the Lobby: Dashboard. But my issue is fixed