Print Page - Firewall rules are not applied immediately

Title: Firewall rules are not applied immediately
Post by: burns1230 on June 28, 2023, 05:06:46 AM

Hi everyone!
I installed OPNsense 23.1.7 and everything works fine.
However, even if the rule is disabled in the firewall rule, the network goes out from the local to the outside.
No new internet, but already connected sessions continue to work.

How can I immediately block an already connected sessions?

Firewall:Rules:LAN

Action : Pass
Direction : in
TCP/IP Version : IPv4
Protocol : any
Source : 192.168.0.15
Destination : any
Gateway : WAN_GW

Title: Re: Firewall rules are not applied immediately
Post by: bartjsmit on June 28, 2023, 05:13:49 PM

Firewall: Diagnostics: States, Actions, Reset state table

Title: Re: Firewall rules are not applied immediately
Post by: burns1230 on June 29, 2023, 02:36:11 AM

It works now.
Thanks a lot.

OPNsense Forum

English Forums => General Discussion => Topic started by: burns1230 on June 28, 2023, 05:06:46 AM