Text only | Text with Images

OPNsense Forum

English Forums => General Discussion => Topic started by: Med0 on June 08, 2023, 04:09:00 AM

Title: Need help with Telus Optic TV and opnsense
Post by: Med0 on June 08, 2023, 04:09:00 AM
Hello All

I tried to setup Telus Optik TV and what ever setting I did ( google it ) video plays 10 sec and stops.
Any idea how to setup Optic TV with PVR.

Thank you inadvance
Title: Re: Need help with Telus Optic TV and opnsense
Post by: mikemikeskiboardbike on June 17, 2023, 07:30:18 AM
Exact same issue here. I selected bridge mode on the telus router, selected LAN1 (it says it will work with optik etc)... I get signals... PVR will play from DVR to each of the other 4 boxes. Live TV dies after 10 or so seconds.

I am now thinking about trying traffic shaping... But I read the telus boxes need 50Megs per second... which is nothing compaired to the 1Gb networking I have here and on my opnsense box. Should work no problems.
Title: Re: Need help with Telus Optic TV and opnsense
Post by: Visseroth on June 17, 2023, 11:56:17 AM
Check your firewall logs from whatever ip address your TV is assigned to see if any of the ports or protocols are being blocked.
Title: Re: Need help with Telus Optic TV and opnsense
Post by: mikemikeskiboardbike on June 18, 2023, 06:07:07 PM
Update... I plugged the DVR into port 2 on the NH20 telus router while it was still in LAN1 bridge mode. The DVR got a 192.168.1.* address and is working perfect now. I am plugging in one of the two boost wifi AP's i have here into port three... and so far I have one of the wireless optik tv receivers working. Just configuring the others now. They just dont want to work (easily) through the opnsense.
Text only | Text with Images