I want to forward ssh traffic. I did following config in
/usr/share/etc/ssh/ssh_config
# $OpenBSD: ssh_config,v 1.35 2020/07/17 03:43:42 dtucker Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.
# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.
# Site-wide defaults for some commonly used options. For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.
# Host *
# ForwardAgent no
# ForwardX11 no
# PasswordAuthentication yes
# HostbasedAuthentication no
# GSSAPIAuthentication no
# GSSAPIDelegateCredentials no
# BatchMode no
# CheckHostIP no
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# IdentityFile ~/.ssh/id_ecdsa
# IdentityFile ~/.ssh/id_ed25519
# Port 22
# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc
# MACs hmac-md5,hmac-sha1,umac-64@openssh.com
# EscapeChar ~
# Tunnel no
# TunnelDevice any:any
# PermitLocalCommand no
# VisualHostKey no
# VerifyHostKeyDNS yes
# ProxyCommand ssh -q -W %h:%p gateway.example.com
# RekeyLimit 1G 1h
# UserKnownHostsFile ~/.ssh/known_hosts.d/%k
### First jump host. Directly reachable
host r0uter.net.work
HostName xxx.ch
### Second jumphost. Only reachable via jumphost1.example.org
Host 5erver.net.work
HostName server.xxx.ch
ProxyJump 5erver
### Host only reachable via alphajump and betajump
Host pikvm.net.work
HostName kvm.xxx.ch
ProxyJump pikvm
#
Host nas.net.work
Hostname nas.xx.ch
Proxyjump nas
But I can't reach the hosts with the hostnames it goes all to r0uter. Why?
I followed https://wiki.gentoo.org/wiki/SSH_jump_host
How I can edit settings of the openssh daemon of OPNsense?