OPNsense Forum

English Forums => General Discussion => Topic started by: frazzetta127 on May 02, 2023, 01:01:40 AM

Title: Per connection speed issues for high bandwidth data transmissions
Post by: frazzetta127 on May 02, 2023, 01:01:40 AM
I have a 6gbit fiber connection to the home. However, on a per-connection basis, I can never seem to achieve speeds above 900mbits.

Here is "multi connection" speed test result from just a few minutes ago
(https://gtwy.net/x/opn/speedtest-multi.jpg)

Here is a "single connection" speed test result done right after
(https://gtwy.net/x/opn/speedtest-single.jpg)

This issue is not just limited to speed tests. Any service of any kind, be it FTP, SCP, HTTP/HTTPS (up or down), and others that I'm probably forgetting about. When I download a torrent (obviously something legal like a linux distribution), it downloads significantly faster because it is downloading from multiple peers.

That the problem happens regardless if the traffic is IPv4 or IPv6.

When I eliminate the router and directly connect Comcast's network to my desktop computer (via 10gbit network card), I am able to achieve full speeds. Furthermore, when I eliminate my entire local network and plug my computer directly into the "LAN" interface on the router, the problem returns. Ergo, this limitation is happening on the router.

I have been through a number of "routers" over the years (computers with either pfSense or OPNsense installed) and I have never been able to solve it with a hardware upgrade. During large file transmissions, none of the systems (RAM, CPU, etc.) are pegged. It's never under any kind of real load.

I'm currently running: Intel(R) Atom(TM) CPU C2758 @ 2.40GHz (8 cores, 8 threads) w/ 16GB RAM

I also have in production at another location a similar build running: Intel(R) Pentium(R) CPU D1508 @ 2.20GHz (2 cores, 2 threads) w/ 16GB RAM

In fact, I actually have a second location with this exact same 6gbit internet service and I experience the problem at both places. I sort of ignored it for years, but now that I am trying to transfer files back and forth between the two locations, it's killing me.
Title: Re: Per connection speed issues for high bandwidth data transmissions
Post by: frazzetta127 on May 09, 2023, 10:18:52 PM
I actually just found an article that explains this same issue that says it is a limitation of the software. Article is written mostly for pfsense. I'm wondering if anyone has heard of this being an issue with opnsense as well?

https://teklager.se/en/knowledge-base/apu2-1-gigabit-throughput-pfsense/