Print Page - [SOLVED] Can't source from only 1 public IP

Title: [SOLVED] Can't source from only 1 public IP
Post by: johnnyb on July 18, 2016, 01:33:01 PM

Hello,

I have an issue in Firewall settings. I can't open an access just for 1 IP source. I must set options in the list (MyFirewall, WAN net, LAN net etc...).

I want to authorize just one public IP (from internet) on my WAN

thank you for help
johnny

Title: Re: Can't source from only 1 public IP
Post by: franco on July 18, 2016, 10:45:57 PM

Hi Johnny,

There is a "single host or network" selection. A firewall IP alias works, too, after creation.

If that doesn't help, let us know which setting you are talking about, best with a screenshot.

Cheers,
Franco

Title: [SOLVED] Re: Can't source from only 1 public IP
Post by: johnnyb on July 19, 2016, 10:54:01 AM

Hello franco,

thank you very much for answer.

I finally set ip source, i had to choose 'Single Host or Network" like you said

To get this field you have to clic on Single Host or Network, it is not very intuitive in the menu

Thank you for help!
johnnyb

OPNsense Forum

Archive => 16.7 Legacy Series => Topic started by: johnnyb on July 18, 2016, 01:33:01 PM