OPNsense Forum

Archive => 23.1 Legacy Series => Topic started by: bearbully on April 08, 2023, 07:56:48 PM

Title: WireGuard Selective Routing to External VPN Endpoint
Post by: bearbully on April 08, 2023, 07:56:48 PM
Hi all,

I have followed the offical "WireGuard Selective Routing to External VPN Endpoint" closely.

In my setup, there are 5 PCs - PCA, PCB, PCC, PCD, PCE. The firewall Aliases for WireGuard are PCA, PCB and PCC

Whenever WireGuard is enabled, both PCD and PCE has no Internet access, while the rest works fine.

How can I enabled PCD and PCE to continue surfing Inernet without WireGuard ? thanks
Title: Re: WireGuard Selective Routing to External VPN Endpoint
Post by: Greelan on April 09, 2023, 11:39:25 PM
Configure it so that those two PCs don't use the tunnel...

(Hopelessly general answer? Bit like the question :) If you want help troubleshooting why it's not working, you need to post all the relevant configs that you have set up in OPNsense using that tutorial.)
Title: Re: WireGuard Selective Routing to External VPN Endpoint
Post by: truesword88 on April 20, 2023, 12:58:03 AM
If you've followed the  wireguard guide meticulously, create another rule without the "NO_WAN_EGRESS" tag for the pc's in question. This way, you'll have fallback to ISP without kill-switch for those PC's.