Hello all,
I'm trying to configure my opnsense router for Digi with IPV6
Strangely enough it works on my desktop PC, but even when using a different PC with the same cable it doesn't work.
Also on https://test-ipv6.com/ i don't have an ipv6
This are my settings:
Interfaces: [LAN]
IPv4 Configuration Type: Static IPV4
IPv6 Configuration Type: Track interface
IPv4 address: 192.168.1.1
IPv4 Upstream Gateway: Auto-Detect
IPv6 Interface: WAN
IPv6 Prefix ID: 0
Interfaces: [WAN]
IPv4 Configuration Type PPPoE
IPv6 Configuration Type: DHPCv6
Configuration Mode: Basic
Request only an IPv6 prefix : X
Prefix delegation size: 64
Send IPv6 prefix hint: X
Use IPv4 connectivity: X
(https://i.postimg.cc/zBpdTHPn/image.png)
(https://i.postimg.cc/L6Gxkpv0/image.png)
(https://i.postimg.cc/tTr5sQYk/image.png)
Is this the same ISP? https://forum.opnsense.org/index.php?topic=7267.0
Quote from: zan on April 01, 2023, 04:06:29 AM
Is this the same ISP? https://forum.opnsense.org/index.php?topic=7267.0
Yes it's the same. I did try unchecking everything as stated in that thread and followed every step but still no ipv6 on the test.