Hi Guys,
i have read lots of posts but can't solve the problem.
i have an opnsense in datacenter site A, where another opnsense site B making a site-to-site vpn.
Site B internet exit correctly through the ovpn tunnel and so exit from Site A to browse internet. both sides see each other correctly.
i want to open a port to site A wan IP, that will be redirected to a site B network port/ip.
if i use interfaces -> diagnostic -> port probe as source address WAN the connection goes timeout, instead using the tunnel ip interface from site A to IP Site B the connection suceed.
so when i try to reach the service, i see the established connection to the remote server but nothing happens.....
i did a simple port forward rule without success.
Site A - B Ovpn Tunnell 10.254.254.0/24
Site B Net 10.10.0.0/16