Hi All,
I have the following phenomenon with an IKEv2 tunnel to a Cisco.
Two IPs in phase 2, then when I ping one IP, no traffic goes to the other.
something like this :
10.10.1.1/32 to 192.168.1.1
10.10.1.2/32 to 192.168.1.2
ping from 192.168.1.1 to 10.10.1.1 works, but then not ping from 192.168.1.2 to 10.10.1.2.
only after recreate the tunnel the ping from 192.168.1.2 to 10.10.1.2 works again, until traffic goes through 192.168.1.1, then only 192.168.1.1 works.
seems like some kind of failover, but with VPN?
Has anyone here had this problem?
Tunnel Isolation is the Key.