Text only | Text with Images

OPNsense Forum

Archive => 23.1 Legacy Series => Topic started by: Roy Albinus on January 30, 2023, 07:18:26 AM

Title: Mobile clients config not working in 23.1
Post by: Roy Albinus on January 30, 2023, 07:18:26 AM
Hi to All,

We are researching the OpnSense to connect using the mobile clients to other remote sites with hvac controllers. The configuration we made in 22.7 works and we get a fase1 and fase2 of the remote sites.  So we tried the identical configuration in the 23.1 version and we are nog getting a fase1 connection running.  What i have noticed that the Lifetime setting is not as i would expect it to be found.  We also use My Identifier with a Distinguished name.  I am not sure where the problem is.   Thx for the support.
Title: Re: Mobile clients config not working in 23.1
Post by: franco on January 30, 2023, 12:09:22 PM
Perhaps it requires aggressive mode? There is a bug we hotfix in a bit.


Cheers,
Franco
Title: Re: Mobile clients config not working in 23.1
Post by: Roy Albinus on January 30, 2023, 03:14:46 PM
Hi Franco,  in the config we use it is in main mode. 
Title: Re: Mobile clients config not working in 23.1
Post by: franco on January 30, 2023, 04:05:58 PM
Can you try 23.1_6. It's online now.


Cheers,
Franco
Title: Re: Mobile clients config not working in 23.1
Post by: Phiolin on January 31, 2023, 02:17:23 PM
23.1_6 fixed my issue with IPSec connections being awfully slow to establish, like taking a good 30 seconds for a mobile device to connect home via IPSec. Was going crazy over the configuration to find out why it was taking so long.
Just updated and now connections are established in 1-2 seconds again. :)
Title: Re: Mobile clients config not working in 23.1
Post by: Roy Albinus on February 03, 2023, 03:25:52 PM
Hi,
After the update the connections are established. So now i am one step furthur.
Text only | Text with Images