The activation of the TRIM feature is important for saving life of the mSata which embed OPNsense.
To do so follow these step:
1 - boot in single user mode
2 - type /sbin/tunefs -t enable /
3 - check if working by typing /sbin/tunefs -p /
4 - reboot and check again to be sure of activation
After reboot in console mode, choose shell option and type "tunefs -p /"
in trim line information this will show "trim enable"
long life to ssd
Thank you, I will try to push this into the guided command line installer.
With 15.1.9.1 and up, a reboot will trigger a TRIM enable if your hardware supports it.
Super,
I will test it