So I got my device yesterday. Installed opnsense 22.7 straight away. Got things up and running with the default Lan/Wan ports active, updates applied etc.. tried to bridge ports 3-5 to the lan. Got that working except if I plug anything into ports 3 - 5, opensense will/and freeze, requiring a hard power cord removal and reboot with the ports 3-5 empty. What I mean by freeze is, I have the device connected to monitor/keyboard and it won't respond and no ports respond once something is plugged into ports 3-5.
Ports 0,1 and 2 work fine if I boot without anything connected to ports 3-5.
Could this possibly be an opnsense issue? Or is my device defective or some bios setting not correct?
I have an email to the amazon seller outstanding, but was wondering if this might be something of a known issue.
This is the device:
https://www.amazon.com/gp/product/B0B84T8VQR/
Thanks
Double check you have the bridge as per the nuances of here https://docs.opnsense.org/manual/how-tos/lan_bridge.html . Hopefully just that and no hardware problem.
Quote from: cookiemonster on October 26, 2022, 05:15:27 PM
Double check you have the bridge as per the nuances of here https://docs.opnsense.org/manual/how-tos/lan_bridge.html . Hopefully just that and no hardware problem.
Yes, that's the guide I followed to setup the bridge. ports 1 and 2 are working properly as part of the bridge. Port zero is the wan. I will go through and double check everything after work tho. Thanks for the suggestion.