OPNsense Forum

Hi

I installed a TRENDnet 2.5GBase-T NIC that uses the Realtek 8125 chipset for the LAN connection on my OPNsense box.  Installed the os-realtek-re driver.

It connects to a TRENDnet 2.5G PoE switch that is connected to my Engenius WAP that has a 2.5G WAN port, and also to a laptop with a 2.5G USB NIC.

iperf3 shows proper 2.5G speeds between the laptop and the WAP, but going to the OPNsense box is only about 650Mbps.

Is there something I need to do to get the OPNsense box to get the 2.5G speeds? or is this an issue with Realtek devices?

Any ideas?  thanks!

I finally found Intel 2.5G NICs and swapped for the Realtek NIC.  Getting slightly better speed but still not near 2.5G.

[ ID] Interval               Transfer         Bitrate
[  5]   0.00-20.02  sec  1.60 GBytes   687 Mbits/sec                  receiver

Here's my hw-probe results:

(http://{your%20computer%20image%20url})

Host: Dell 0FDY5C A00 2022 - desktop with OPNsense 22.7.6 (exported from BSD-Hardware.info (https://bsd-hardware.info/?probe=eb9ffe08e7))

PROBE ID (https://bsd-hardware.info/?probe=eb9ffe08e7)

{TELL THE STORY ABOUT YOUR COMPUTER HERE}

Devices on the board are the following:

DEVICE	STATUS	COMMENT
BUS: PCI ID: 8086:1912:1028:07a2 CLASS: 03-00-00 VENDOR: Intel DEVICE: HD Graphics 530 TYPE: graphics card DRIVER: vgapci	Detected
BUS: PCI ID: 8086:a2f0:1028:07a2 CLASS: 04-03-00 VENDOR: Intel DEVICE: 200 Series PCH HD Audio TYPE: sound DRIVER: hdac	Detected
BUS: PCI ID: 8086:15d6:1028:07a2 CLASS: 02-00-00 VENDOR: Intel DEVICE: Ethernet Connection (5) I219-V TYPE: network DRIVER: em	Detected
BUS: PCI ID: 8086:15f3 (2x) CLASS: 02-00-00 VENDOR: Intel DEVICE: Ethernet Controller I225-V TYPE: network DRIVER: igc	Works
BUS: PCI ID: 144d:a80a:144d:a801 CLASS: 01-08-02 VENDOR: Samsung Electronics DEVICE: NVMe SSD Controller PM9A1/PM9A3/980PRO TYPE: storage DRIVER: nvme	Detected
BUS: PCI ID: 8086:a282:1028:07a2 CLASS: 01-06-01 VENDOR: Intel DEVICE: 200 Series PCH SATA controller [AHCI mode] TYPE: storage DRIVER: ahci	Detected
BUS: PCI ID: 8086:1901:1028:07a2 CLASS: 06-04-00 VENDOR: Intel DEVICE: 6th-10th Gen Core Processor PCIe Controller (x16) TYPE: bridge DRIVER: pcib	Detected
BUS: PCI ID: 8086:191f:1028:07a2 CLASS: 06-00-00 VENDOR: Intel Corporation DEVICE: Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers TYPE: bridge DRIVER: hostb	Detected
BUS: PCI ID: 8086:a298:1028:07a2 CLASS: 06-04-00 VENDOR: Intel DEVICE: 200 Series PCH PCI Express Root Port #9 TYPE: bridge DRIVER: pcib	Works
BUS: PCI ID: 8086:a2c6:1028:07a2 CLASS: 06-01-00 VENDOR: Intel DEVICE: 200 Series PCH LPC Controller (Q270) TYPE: bridge DRIVER: isab	Detected
BUS: PCI ID: 8086:a2e7:1028:07a2 CLASS: 06-04-00 VENDOR: Intel DEVICE: 200 Series PCH PCI Express Root Port #17 TYPE: bridge DRIVER: pcib	Detected
BUS: PCI ID: 8086:a2ba:1028:07a2 CLASS: 07-80-00 VENDOR: Intel DEVICE: 200 Series PCH CSME HECI #1 TYPE: communication controller DRIVER: -	Failed	Driver is not found or not configured. We have not found anything related to this device in any FreeBSD versions up to 14-CURRENT or known additional packages.
BUS: PCI ID: 8086:a2bd:1028:07a2 CLASS: 07-00-02 VENDOR: Intel DEVICE: 200 Series Chipset Family KT Redirection TYPE: communication controller DRIVER: -	Failed	Driver is not found or not configured. We have not found anything related to this device in any FreeBSD versions up to 14-CURRENT or known additional packages.
BUS: PCI ID: 8086:a2a1:1028:07a2 CLASS: 05-80-00 VENDOR: Intel DEVICE: 200 Series/Z370 Chipset Family Power Management Controller TYPE: memory controller DRIVER: -	Detected
BUS: PCI ID: 8086:a2b1:1028:07a2 CLASS: 11-80-00 VENDOR: Intel DEVICE: 200 Series PCH Thermal Subsystem TYPE: signal processing DRIVER: -	Detected
BUS: PCI ID: 8086:a2a3:1028:07a2 CLASS: 0c-05-00 VENDOR: Intel DEVICE: 200 Series/Z370 Chipset Family SMBus Controller TYPE: smbus DRIVER: ichsmb	Detected
BUS: PCI ID: 8086:a2af:1028:07a2 CLASS: 0c-03-30 VENDOR: Intel DEVICE: 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller TYPE: usb controller DRIVER: xhci	Detected
BUS: USB ID: 0b95:6804 CLASS: 09-00-00 VENDOR: ASIX Electronics DEVICE: AX68004 TYPE: hub DRIVER: uhub	Detected
BUS: USB ID: 1d6b:0003 CLASS: 09-00-00 VENDOR: BSD DEVICE: 3.0 root hub TYPE: hub DRIVER: uhub	Detected
BUS: USB ID: 0b95:6801 CLASS: 03-01-01 VENDOR: ASIX Electronics DEVICE: Virtual HID Ver:0.01 TYPE: keyboard DRIVER: ukbd	Detected
BUS: USB ID: 413c:2113 CLASS: 03-01-01 VENDOR: Dell DEVICE: KB216 Wired Keyboard TYPE: keyboard DRIVER: ukbd	Detected
BUS: USB ID: 413c:301a CLASS: 03-01-02 VENDOR: Dell DEVICE: Dell MS116 Optical Mouse TYPE: mouse DRIVER: ums	Detected
BUS: SYS ID: dell-1-20-0-03-23-2022 VENDOR: Dell Inc. DEVICE: BIOS 1.20.0 03/23/2022 TYPE: bios DRIVER: -	Works
BUS: SYS ID: intel-6-94-3-core-i5-6500 (4x) VENDOR: Intel DEVICE: Core i5-6500 CPU @ 3.20GHz TYPE: cpu DRIVER: -	Works
BUS: SYS ID: crucial-ct8g4dfs8266-m8fr-dimm [C61] VENDOR: Crucial DEVICE: RAM CT8G4DFS8266.M8FR 8GB DIMM DDR4 2667MT/s TYPE: memory DRIVER: -	Works
BUS: SYS ID: micron-8atf1g64az-2g3h1r-dimm [224] VENDOR: Micron DEVICE: RAM 8ATF1G64AZ-2G3H1R 8GB DIMM DDR4 2400MT/s TYPE: memory DRIVER: -	Works
BUS: SYS ID: dell-0fdy5c-a00 VENDOR: Dell Inc. DEVICE: Motherboard 0FDY5C A00 TYPE: motherboard DRIVER: -	Works
BUS: PS/2 ID: ps/2:keyboard VENDOR: DEVICE: AT Keyboard TYPE: keyboard DRIVER: atkbdc	Detected
BUS: SCSI ID: hl-dt-st-dvd-rom-du90n VENDOR: HL-DT-ST DEVICE: DVD-ROM DU90N TYPE: cdrom DRIVER: cd, ahcich	Detected
BUS: NVME ID: samsung-pm9a1-nvme-256gb [F14] VENDOR: Samsung DEVICE: PM9A1 NVMe 256GB TYPE: disk DRIVER: nvd	Works

after going through all the settings one by one I finally figured it out.  When IPS/IDS is turned on, the speeds drop.  Turn it off and speeds are as they should be.  IDS drops it a bit, IPS drops it a lot more.  IPS with hyperscan drops it the most, IPS with default pattern matcher drops less than with hyperscan.