Hello,
I have an issue that has been going on now for some time that is very anoying and still after 22.7.6 upgrade persists.
BACKGROUND:
I have 4 IPsec tunnels (one standard and 3 VTI) and a OpenVPN Server configured
PROBLEM:
What happens is that every time I reboot the opnsense, two of the static routes configured gets corrupted and selects a different gateway. Happens every time I reboot. If I remove and set them up again the routing table becomes correct and routing starts working OK.
After REBOOT
Destination Gateway Flags Use MTU Netif Netif(name)
192.168.10.0/24 192.168.121.2 UGS NaN 1500 ovpns1 OVPN_SERVER
192.168.20.0/24 192.168.121.2 UGS NaN 1500 ovpns1 OVPN_SERVER
After reconfigure 192.168.10.0 and 192.168.20.0
Destination Gateway Flags Use MTU Netif Netif(name)
192.168.10.0/24 link#8 US NaN 1400 ipsec1 HENRIK_VTI
192.168.20.0/24 link#9 US NaN 1400 ipsec3 HENRIK_MAMMAPAPPA_DIREKT
Have tried all sorts of things but problem still persists and ONLY one these two routes...
Feel it is a bug lurking...
Has anyone else seen this problem and could someone at opnsense have a look.
I have attached some screenshots and logfiles.
Contact me with pm for more screenshots, logs and I could include the config.xml as well.
UPDATE:
I have now found the culprit.
I had a by misstake defined a bunch of networks in OpenVPN Server config "IPv4 Remote Network" which caused it to highjack these nets towards the ovpns1 interface instead of the one I had defined in the routing table. Problem is now solved...
Best regards
Dan Lundqvist
Stockholm, Sweden