Print Page - How tu use other ports on DEC740

Title: How tu use other ports on DEC740
Post by: vincen on September 01, 2022, 11:15:09 AM

Hi

I have a little issue I'm unable to find solution by myself. I have a DEC 740 with following configuration:
one SFP+ goes at fiber of my ISP
one SFP+ is downlink to my main switch.

I'd like to use also the 3 Ethernet ports to plug additional devices. During initial wizard I have selected these ports as additional LAN ports but they are not working.
Last time I tried to configure them using the Web GUI I locked myself out of opnsens and had to reset it. What did I miss to get these ports working as the downling SFP port and allows me to connect additional LAN devices ?

Thanks for help,

Vincèn

Title: Re: How tu use other ports on DEC740
Post by: Patrick M. Hausen on September 01, 2022, 11:38:35 AM

You need to set up a LAN bridge as documented here:
https://docs.opnsense.org/manual/how-tos/lan_bridge.html

Title: Re: How tu use other ports on DEC740
Post by: vincen on February 02, 2023, 01:31:00 PM

Sorry for late answer and thanks for the link, will try it on mine after a full backup just in case :D

OPNsense Forum

Archive => 22.7 Legacy Series => Topic started by: vincen on September 01, 2022, 11:15:09 AM