Take the blue "Cisco" com-cable and install OPNsense via the terminal (use serial OPNsense image).
Configure OPNsense and follow onscreen steps.
Make sure you define the LAN and WAN interfaces correctly !!
Activate and configure the DHCP server on the LAN interface.
WAN port = connect your internet cable to it with a UTPcat5e cable
LAN port = connect your pc/laptop/switch to it with a UTPcat5e cable (after you succesfully installed OPNsense)
Your pc/laptop should be able to access the OPNsense webgui via a webbrowser.
Continue the final setup and follow the onscreen steps.
betflikสล็อต (https://betflik13.com/)