I am setting up a site-to-site VPN but I have issue to get Unbound to use the remote site's DNS server for it's local domain.
I configured Unbound to use the remote site dns server's IP for local.foo.com.
Alias my_alias: networks I want to be routed through the VPN (which includes the DNS server's IP).
I have 2 OpenVPN clients to connect to the same site, the second one being a failover.
I configured a gateway group with the 2 gateways created by the OpenVPN clients.
Configured 2 NAT outbound rules:
- interface=my_vpn_iface_1, src=any, dest=my_alias, nat address=interface address, static=no
- same with interface=my_vpn_iface_2
Added 1 floating rule to route my_alias through the VPN:
- quick, direction=in, protocol=ipv4*, src=*, dest=my_alias, gateway=my_vpn_gateway_group
This rule should route any traffic going to my_alias from any interface through the VPN gateway group.
I can access the remote site from LAN.
However, I cannot access it from the firewall itself.
I tried configuring a static route.
However, I cannot set the gateway to my_vpn_gateway_group, only single gateways can be selected.
Firewall logs shows "let out anything from firewall host itself".
I also tried enabling "Disable automatic rules which force local services to use the assigned interface gateway", but the same issue occur.
Any help would be appreciated.
เว็บแทงบอลฝากถอนไม่มีขั้นต่ำ (https://socialmediaandemploymentlaw.com/%e0%b9%80%e0%b8%a7%e0%b9%87%e0%b8%9a%e0%b9%81%e0%b8%97%e0%b8%87%e0%b8%9a%e0%b8%ad%e0%b8%a5%e0%b8%ad%e0%b8%ad%e0%b8%99%e0%b9%84%e0%b8%a5%e0%b8%99%e0%b9%8c/)