Print Page - 1:1 NAT Not Working

Title: 1:1 NAT Not Working
Post by: amitis5 on August 17, 2022, 05:50:50 PM

I have placed an IP from my public IP pool in a virtual IP (xx.xx.xx.108). I created a 1:1 NAT rule:

Interface -> WAN
External IP -> xx.xx.xx.108
Internal IP -> 10.0.0.144 listed under source with a /32 subnet
Destination -> any
Type -> BINAT

WAN Firewall rules allow all traffic to 10.0.0.144

VLAN is setup through the switches correctly as well.

What am I missing?

Thanks in advance for the assistance.

Title: Re: 1:1 NAT Not Working
Post by: NW4FUN on August 18, 2022, 11:51:32 AM

I'm assuming NAT REFLECTION--> ENABLED?

OPNsense Forum

Archive => 22.7 Legacy Series => Topic started by: amitis5 on August 17, 2022, 05:50:50 PM