Print Page - very slow boot (Configuring firewall...)

Title: very slow boot (Configuring firewall...)
Post by: tuxlemmi on August 11, 2022, 09:56:14 AM

I'm having very long boot times (10min).
At the console screen it happens when opnsense is "Configuring firewall..." which appears multiple times during the system startup.

Any glue ?

Title: Re: very slow boot (Configuring firewall...)
Post by: tiermutter on August 11, 2022, 11:23:33 AM

Hardware?
My old Intel D510 hardware also needed this time to go up.

Title: Re: very slow boot (Configuring firewall...)
Post by: tuxlemmi on August 11, 2022, 11:48:35 AM

FTS FUTRO S920
MB: FTS D3313-A1x
AMD GX-415GA SOC with Radeon(tm) HD Graphics (4 cores, 4 threads)
8GB RAM
32GB SSD
REALTEK onboard NIC for LAN
Draytek VigorNIC 132 PCIe as VDSL Modem for WAN

Title: Re: very slow boot (Configuring firewall...)
Post by: opnsense@dkeith.com on August 31, 2022, 05:52:27 PM

have similar issues.
hangs on configuring firewall and
ipsec0: changing name to ipsec1
ipsec2: changing name to ipsec3
ipsec4: changing name to ipsec2
configuring firewall

only have 3 ipsec trunks only 1 is actually in use.

have it runing on vmware 2cpu 8Gb hard drive, 2G ram

looking at + 5minutes boot time ay ideas whare to look.

Versions   OPNsense 22.7.2-amd64
FreeBSD 13.1-RELEASE-p1
OpenSSL 1.1.1q 5 Jul 2022
Updates   Click to check for updates.
CPU type   Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz (2 cores, 2 threads)

OPNsense Forum

Archive => 22.7 Legacy Series => Topic started by: tuxlemmi on August 11, 2022, 09:56:14 AM