Hi,
So I've had an HP T620 Plus running Opnsense for a while now (I think since 21.7), but since the upgrade to 22.1.1, after any update it has failed to reboot. When I hook up a monitor (or rather, change input on my TV, as the box is behind the TV), I see an "exitbootservices error 2" and the box just hangs. Can't ssh to it, if I plug in a keyboard at this point I cannot interact with it etc.
I tried restarting by holding power button but same issue, unplugged power entirely, same issue. I then plugged a USB keyboard in and hard rebooted it again and... It worked?
For all subsequent upgrades I've had the same issue and used the same "fix". Literally all I need to do to get it to successfully boot is plug in a keyboard.
Any thoughts on why this might be or what I ought to investigate? Guessing it's something introduced in freebsd 13? Note that this has never been an issue prior to v22.1.1 but is consistently happening now.
Thanks!
คาสิโนออนไลน์บนมือถือ (https://binaryreviewsrace.com/%E0%B8%84%E0%B8%B2%E0%B8%AA%E0%B8%B4%E0%B9%82%E0%B8%99%E0%B8%AD%E0%B8%AD%E0%B8%99%E0%B9%84%E0%B8%A5%E0%B8%99%E0%B9%8C%E0%B8%9A%E0%B8%99%E0%B8%A1%E0%B8%B7%E0%B8%AD%E0%B8%96%E0%B8%B7%E0%B8%AD/)
Sounds new for sure. Some of these effects might be avoided using a "mute" console setting as primary and secondary off under System: Settings: Administration. But this can also be suboptimal for recovery reasons and so we do not recommend it.
Best to skim https://bugs.freebsd.org and open an issue there to have the right people looking at it.
Cheers,
Franco