OPNsense Forum

English Forums => General Discussion => Topic started by: pankaj on March 21, 2022, 01:51:35 AM

Title: VLANs stopped working [Solved]
Post by: pankaj on March 21, 2022, 01:51:35 AM
I recently upgraded to version 22.1.3 and then noticed shortly thereafter that all the managed switches (Trendnet TEG-S80ES) in the house running VLANs are not working. None of the devices connected to VLAN ports are getting IP addresses, I cannot even see the DHCP requests in the logs on OPNSense.

For testing, I changed one VLAN port to "unmanaged" and the port immediately assigned an IP address, so there is no fault in the wiring and its hard to believe that four switches would go bad at the same time. But I am unable to pinpoint the source of the problem and even clueless where to look for trouble in OPNSense as I did not change any settings on the firewall or the switches.

If anyone has any pointers on where to start looking, please post here.
Thanks!
Title: Re: VLANs stopped working
Post by: franco on March 21, 2022, 07:54:49 AM
Check the 22.1 release notes or forum posts for possible solutions.


Cheers,
Franco
Title: Re: VLANs stopped working
Post by: pankaj on March 22, 2022, 06:08:19 AM
So I installed 21.7.1 on the device and the problem went away, it seems to be a bug in v22.1.3.

Thanks.
Title: Re: VLANs stopped working [Solved]
Post by: franco on March 22, 2022, 08:42:59 AM
Not a fix and likely not a bug.


Cheers,
Franco