hey
i have to shorten my story
- using the sense for month now, but with issues
- im using proxmox - and the sense is working in a VM
- all is fine, working good - no config errors (as i need - i can work with that issues)
- i have many vms (windows and debian linux)
- but, from the start, as im using opnsense, i have to use the option 11 in the console, because, when im starting opnsense, NONE of my linux machines have access to the internet.
- if im using option 11 to reload all services, all linux systems have internet - so this was my fix for that (we tried to find the error here in the forum, but it did not work)
https://forum.opnsense.org/index.php?topic=25571
its german, i hope u can read it anyway. ;)
- after the last update (OPNsense 22.1.2_1-amd64) my "WG working before the patch", is not working anymore
- if im starting opnsense and using option 11, to get all my vms in the internet, wg works
- BUT if im logout from the console, it states that wg0 is changed to down
that must be a bug, or something, because, if im stay logged in, wg works
any ideas?
Chris
Hello:
I have OPNsense 22.1.1_3 on Proxmox 7-1.10 with 3 Intel nics passed through, I have Surfshark VPN and 4 vlans. I setup with this guide (https://schnerring.net/blog/opnsense-baseline-guide-with-vpn-guest-and-vlan-support/).
In the past I had a problem with VMs and vlan connections, but it was my Proxmox setup that was the problem.
Everything is running rock solid as of this writing. ( touch wood. )
Went everything is running good I don't update for a week or so. I let small bugs work their way out. If it's not broke don't fix it syndrome.
Again, try to look at your Proxmox network setup. I know I'm not really giving you a solution, but I know its possible.
Try rolling back to 22.1.1_3.
Brian
Hey Brain
Thx for your reply.
I have no VLANS or something, my setup looks as u can see in the attached picture.
and all other VMs are okay (windows) - only the Linux VMs are not working. they get ips, they can communicate in tha LAN segment, but the traffic from them is broken somewhere in opnsense - because the traffic is not seen in opnsense.
if i reload the services, it works - but only, if i dont logout....
After the last patch, the issue is there...
anyone have an idea?
I'm on the latest patch and wireguard appears to be working for me. However, I'm not using any site to site wireguard VPN tunnels, this is just 'roadwarrior' type stuff.
** solved for my specific case, site-to-site endpoints should not have endpoint port and adress **