Text only | Text with Images

OPNsense Forum

English Forums => General Discussion => Topic started by: sunmast on March 02, 2022, 10:37:11 PM

Title: [SOLVED] How to enable IPv6 inbound routing?
Post by: sunmast on March 02, 2022, 10:37:11 PM
With IPv6 enabled, every client in the LAN is assigned with a IPv6 address as expected and is working. But how to allow IPv6 inbound routing? I.e., how to allow them to be accessible from internet (I'm running a few servers in the LAN)? Thanks.
Title: Re: How to enable IPv6 inbound routing?
Post by: Patrick M. Hausen on March 02, 2022, 11:12:30 PM
Firewall > Rules > WAN > Permit IPv6 Destination Address in ...
Title: Re: How to enable IPv6 inbound routing?
Post by: sunmast on March 03, 2022, 03:04:20 AM
Quote from: pmhausen on March 02, 2022, 11:12:30 PM
Firewall > Rules > WAN > Permit IPv6 Destination Address in ...

It solved the problem. Thanks!
I thought it's a routing problem instead of firewall :)
Text only | Text with Images