I have been getting more and more frustrated with trying to get a very basic templated setup working in to which to move a number of different lab environments I have set up.
The setup is basic:
1. single server with single quad 1g quad port running ESXi 7
2. Unifi switches and router
I have setup OPNsense as a VM on ESXi:
WAN Virtual Adapter >> OPNSENSE - WAN Port Group > SECURE vSwitch
(https://i.ibb.co/Hr4TNMM/Screen-Shot-2022-02-19-at-16-56-47.png) (https://ibb.co/8jsgzRR)
LAN Virtual Adapter >> OPSENSE - LAN Port Group > LABS vSwitch
(https://i.ibb.co/n7qXnV7/Screen-Shot-2022-02-19-at-17-04-51.png) (https://ibb.co/m9rnXY9)
On OPNsense I have set up:
LAN :
(https://i.ibb.co/znzbzv8/Screen-Shot-2022-02-19-at-17-21-31.png) (https://ibb.co/FxFJFTs)
WAN :
(https://i.ibb.co/nctzW7L/Screen-Shot-2022-02-19-at-17-22-55.png) (https://ibb.co/xjdJ417)
OPT1:
(https://i.ibb.co/G33nFkn/Screen-Shot-2022-02-19-at-17-23-59.png) (https://ibb.co/gFFm6wm)
I have enabled DHCPv4 service on OPT1 similar to how it is set up on LAN
I have VM jumpoff.lab.local attached to OPNSENSE - LAN Port Group - this receives DHCP address and network connectivity ok.
I have VM win10-client01.main.test attached to Port Group to vSwitch LABS:
(https://i.ibb.co/zftb2gS/Screen-Shot-2022-02-19-at-17-29-13.png) (https://ibb.co/2KpPMrj)
This win10-client01 does not get any network connectivity.
On Unifi I have setup a VLAN Only network definition for VLAN 100.
Not sure how to get win10-client01 VM working on the network. Any help appreciated.
May I bump? - any hints on how to set up here ?
Mod: Could you please move to General?