Text only | Text with Images

OPNsense Forum

English Forums => Zenarmor (Sensei) => Topic started by: JasonJoel on February 19, 2022, 04:22:48 PM

Title: Monitoring parent plus only SOME child vlans
Post by: JasonJoel on February 19, 2022, 04:22:48 PM
I changed around my hardware when moving to 22.1.

Now I have 1 10Gb connection.

LAN - untagged/parent interface
IoT1 - vlan2
IoT2 - vlan3
...

I only want to monitor LAN and IoT1 in Sensei (purely to work around the Sensei device count license restrictions).

Is there away to monitor the parent and EXCLUDE/NOT MONITOR some of the child vlans? Or is it always going to count devices on all child vlans no matter what if you incluide the parent?

If the latter, I will definitely go above 100 devices due to many devices on my IoT2 vlan.
Title: Re: Monitoring parent plus only SOME child vlans
Post by: athurdent on February 19, 2022, 04:38:18 PM
Try in the Exempted VLANs & Networks section.
Title: Re: Monitoring parent plus only SOME child vlans
Post by: JasonJoel on February 19, 2022, 04:46:57 PM
I forgot about that!

The vlan exclusion option doesn't show up at all on the configuration screen when on the free version, and I hadn't installed my license yet after the rebuild.

I'll go install my license and exclude the VLANs I want to ignore. Duh on me.

Thanks!

EDIT: Installed my license, and excluded the unwanted VLANs. Thanks again.
Text only | Text with Images