OPNsense Forum

Archive => 22.1 Legacy Series => Topic started by: rebuilder on February 15, 2022, 02:26:15 pm

Title: Wireguard install on 22.1 clean install
Post by: rebuilder on February 15, 2022, 02:26:15 pm

Doing a clean install of 22.1 and using https://docs.opnsense.org/manual/how-tos/wireguard-client-mullvad.html
points to "set the DNS to 193.138.218.74. This is the one MulladVPN provides for privacy".
Like to know where that is set in the install since it does not seem to be in the VPN/Wireguard/Local page

Title: Re: Wireguard install on 22.1 clean install
Post by: franco on February 15, 2022, 02:50:19 pm

Turn on "advanced" switch.


Cheers,
Franco

Title: Re: Wireguard install on 22.1 clean install
Post by: rebuilder on February 16, 2022, 02:58:16 pm

Franco, thanks for the information. Have inserted the DNS and now get the message on the console during boot:
"Running wireguard-go is not required because this kernel has first class support for wireguard. For information
on installing the kernel module, please visit  https://www.wireguard.com/install". I did not see any information on
that site referencing opnsense 22.1

Like to know if this impacts my install?

Title: Re: Wireguard install on 22.1 clean install
Post by: franco on February 16, 2022, 03:19:00 pm

You can in theory manually install the kernel module yet the message only nags you in this regard: If you haven't had the kernel module before you don't have it now either and things work like always.


Cheers,
Franco