I'm new to the OPNSense world and trying to setup NordVPN. I get to step 13 on the editing of IPv4 and it's asking to set the Gateway to NORDVPN_VPN4. There is nothing prior that sets this value that I see. The values I have a shown in the attached image. Any pointers on where I went off course?
13.Navigate to Firewall -> Rules -> LAN and delete the IPv6 rule. After that, click on the edit button next to IPv4.
Scroll down and under Advanced features, select Gateway as NORDVPN_VPN4. Click Save.
https://support.nordvpn.com/Connectivity/Router/1292598142/OPNsense-19-1-setup-with-NordVPN.htm
Thanks
Did you add an interface, gateway and NAT rule on this config? Sounds like you want to use selective routing is that right?
Although for Wireguard, the principles are the same on this how to https://docs.opnsense.org/manual/how-tos/wireguard-selective-routing.html# give it a try and see how you go.
Manaki
Exact same issue when using guide for OPNsense 21 setup with NordVPN. Currently using OpnSense 22.7.3 Have rechecked setup with guide multiple times. It would appear the guide needs updating.
You just missed 6.-8. it seems...