OPNsense Forum

Archive => 21.7 Legacy Series => Topic started by: Jomkoun on January 04, 2022, 07:24:52 AM

Title: Problem with the failover process when a single interface fails
Post by: Jomkoun on January 04, 2022, 07:24:52 AM
Hopefully this is just a newbie error as it doesnt seem like im doing it right.

I set up CARP with my LAN connection (And each of my VLAN connections) as well as my 3 WAN connections.

Everything syncs and the status looks right.

If i remove a connection from one machine, it drops 1 ping and then transitions to the other machine and resumes pinging. The problem is that some of the VIPs are sitting on each node and services dont work so I cant actually do dns lookups for example. I have the checkbox for disable preempt off on both nodes and set up the outbound NAT rules as well. Is there something else that I am missing?
แทงบอลออนไลน์ (https://ilovealgarve.net/web-football-no-agents/)
Title: Re: Problem with the failover process when a single interface fails
Post by: mimugmail on January 04, 2022, 08:52:09 AM
So Disable Preemption is NOT checked correct? This is important!
Also go to Interfaces : Overview and check on both firewalls is interfaces are assigned in correct order.