Text only | Text with Images

OPNsense Forum

English Forums => General Discussion => Topic started by: g0nz0uk on November 20, 2021, 07:04:37 PM

Title: Power cut at home OPNsense now says "Can't load from Kernel"
Post by: g0nz0uk on November 20, 2021, 07:04:37 PM
Hello,

We had a power cut and my OPNsense server now boots up with a "Can't load from Kernel".

Is this a reinstall job?

I have a backup of the config too, so is it a reinstall, then somehow get config onto it via the GUI?

I'm using a HP T730.  It has a SanDisk 32GB M.2 flash drive.

Photo

https://i.imgur.com/gaCdsES.jpg (https://i.imgur.com/gaCdsES.jpg)
Title: Re: Power cut at home OPNsense now says "Can't load from Kernel"
Post by: Patrick M. Hausen on November 20, 2021, 07:36:15 PM
That is definitely a reinstall. Good you have a config. Do yourself a favour, install with ZFS and your OPNsense will almost certainly survive the next power outage.
Title: Re: Power cut at home OPNsense now says "Can't load from Kernel"
Post by: g0nz0uk on November 20, 2021, 07:43:32 PM
Just reinstalled and I'm getting this, what should I do or is it a new M.2 drive?

https://i.imgur.com/pIHH2Lu.jpg

https://i.imgur.com/sJV9yjK.jpg
Text only | Text with Images