Text only | Text with Images

OPNsense Forum

English Forums => General Discussion => Topic started by: Morta on November 18, 2021, 12:17:17 AM

Title: [SOLVED]Make server accessible behind OPNsense NAT44
Post by: Morta on November 18, 2021, 12:17:17 AM
So my IPv6 config is running and I can curl -v6 joelmueller.ch behind the opnsense firewall.
, but I fails with the NAT rule for access the webserver (http,https) over IPv4.

I did follow this tutorial

https://forum.opnsense.org/index.php?topic=8783.0 (https://forum.opnsense.org/index.php?topic=8783.0)

also disabled the WebUI with changing Access-Port from WAN to LAN.

Is this tutorial still actual?

Title: Re: Make server accessible behind OPNsense NAT44
Post by: Morta on November 18, 2021, 06:36:13 AM
(https://abload.de/img/screeenshot_natbukyf.png)

The other rule looks exactly the same but https instead of http
Title: Re: [SOLVED]Make server accessible behind OPNsense NAT44
Post by: Morta on November 18, 2021, 06:43:55 AM
The problem was that the aliases had a wrong content (5erver) instead of IPv4 192.168.1.100
Text only | Text with Images