hi
I use opnsense as my router and I setup a PPPoE network, I have ipv6 on both wan and lan, and a /60 ipv6-pd.
This is ipv6 info:
Internet6:
Destination Gateway Flags Netif Expire
default fe80::a19:a6ff:fe3f:53f2%pppoe0 UG pppoe0
::1 link#8 UH lo0
240e:xa0:xxxx:xxxx::/64 link#12 U pppoe0
240e:xa0:xxxx:xxxx:320e:d5ff:fe55:d762 link#12 UHS lo0
240e:ya1:yyyy:yyyy::/64 link#1 U igb0
240e:ya1:yyyy:yyyy:320e:d5ff:fe55:d762 link#1 UHS lo0
fe80::%igb0/64 link#1 U igb0
fe80::320e:d5ff:fe55:d762%igb0 link#1 UHS lo0
fe80::%em0/64 link#6 U em0
fe80::320e:d5ff:fe52:735%em0 link#6 UHS lo0
fe80::%lo0/64 link#8 U lo0
fe80::1%lo0 link#8 UHS lo0
fe80::320e:d5ff:fe55:d762%ovpns1 link#11 UHS lo0
fe80::%pppoe0/64 link#12 U pppoe0
fe80::320e:d5ff:fe55:d762%pppoe0 link#12 UHS lo0
pppoe0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric 0 mtu 1492
inet6 fe80::320e:d5ff:fe55:d762%pppoe0 prefixlen 64 scopeid 0xc
inet6 240e:xa0:xxxx:xxxx:320e:d5ff:fe55:d762 prefixlen 64 autoconf
inet 180.a.b.c --> 180.a.b.1 netmask 0xffffffff
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=802028<VLAN_MTU,JUMBO_MTU,WOL_MAGIC>
ether 30:0e:d5:55:d7:62
inet6 fe80::320e:d5ff:fe55:d762%igb0 prefixlen 64 scopeid 0x1
inet6 240e:xa1:yyyy:yyyy:320e:d5ff:fe55:d762 prefixlen 64
inet 10.0.1.1 netmask 0xffffff00 broadcast 10.0.1.255
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
My ipv6 is working, I can connect my server in Lan using ipv6 slaac address.
I could not connet the server such as openvpn and openssh-server running on opnsense using ip 240e:xa0:xxxx:xxxx:320e:d5ff:fe55:d762 or 240e:xa1:yyyy:yyyy:320e:d5ff:fe55:d762，but I can connect it by using by public ipv4 address on pppoe0.
This is openvpn server log on opnsense:
2021-08-30T16:15:33 openvpn[63412] 240e:zzz:zzzz:zzzz:8dae:664f:4e7:609f TLS: Initial packet from [AF_INET6]240e:zzz:zzzz:zzzz:8dae:664f:4e7:609f:62142 (via 240e:xa0:xxxx:yyyy:320e:d5ff:fe55:d762%pppoe0), sid=33962ebb a7001040
2021-08-30T16:15:33 openvpn[63412] 240e:zzz:zzzz:zzzz:8dae:664f:4e7:609f Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
2021-08-30T16:15:33 openvpn[63412] 240e:zzz:zzzz:zzzz:8dae:664f:4e7:609f Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
2021-08-30T16:15:27 openvpn[63412] 240e:zzz:zzzz:zzzz:8dae:664f:4e7:609f SIGUSR1[soft,tls-error] received, client-instance restarting
2021-08-30T16:15:27 openvpn[63412] 240e:zzz:zzzz:zzzz:8dae:664f:4e7:609f TLS Error: TLS handshake failed
2021-08-30T16:15:27 openvpn[63412] 240e:zzz:zzzz:zzzz:8dae:664f:4e7:609f TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
I check the firewall log, the firewall accepted and forwarded the traffic.It seems server application received the request packet but can't response to client.
This is my firewal rule on WAN interface:
(https://i.loli.net/2021/08/30/L1xbcGt57dVSIHB.png) (https://sm.ms/image/L1xbcGt57dVSIHB)
Can anyone help me?Thanks