I have the same problem starting from 20.7 versions.
Each boot stops for about 100 seconds after message
Reconfiguring IPv4 on WAN NIC.
After the error message the boot process continues and finished fine.
Related lines from boot screen:
QuoteStarting UPnP service...done.
Starting NTP service...deferred.
Starting Unbound DNS...done.
Generating RRD graphs...done.
Configuring system logging...done.
>>> Invoking start script 'newwanip'
Reconfiguring IPv4 on ovpnc2: OK
Reconfiguring IPv4 on igb0: error in configd communication %s, see syslog for details
Reconfiguring routes: OK
>>> Invoking start script 'freebsd'
Starting vnstat.
Starting dnscrypt_proxy.
WARNING: attempt to domain_add(netgraph) after domainfinalize()
setup igb1
setup ovpnc2 [egress only)
ngctl: send msg: No such file or directory error
ovpnc2: cannot create netflow node for ovpnc2
setup ovpnc1 [egress only)
ngctl: send msg: No such file or directory
error ovpnc1: cannot create netflow node for ovpnc1
setup igb0 [egress only)
Updating CPU Microcode...
Related lines from GUI, general log:
Quote2021-06-19T16:49:19 opnsense[74603] /usr/local/etc/rc.routing_configure: ROUTING: keeping current default gateway '46.88.22.44'
2021-06-19T16:49:19 opnsense[74603] /usr/local/etc/rc.routing_configure: ROUTING: setting IPv4 default route to 46.88.22.44
2021-06-19T16:49:19 opnsense[74603] /usr/local/etc/rc.routing_configure: ROUTING: IPv4 default gateway set to wan
2021-06-19T16:49:19 opnsense[74603] /usr/local/etc/rc.routing_configure: ROUTING: entering configure using defaults
2021-06-19T16:49:18 configctl[11670] error in configd communication Traceback (most recent call last): File "/usr/local/opnsense/service/configd_ctl.py", line 68, in exec_config_cmd line = sock.recv(65536).decode() socket.timeout: timed out
2021-06-19T16:47:19 opnsense[91535] /usr/local/etc/rc.newwanip: Resyncing OpenVPN instances for interface WAN.
2021-06-19T16:47:19 opnsense[91535] plugins_configure vpn (execute task : openvpn_configure_do(,wan))
2021-06-19T16:47:19 opnsense[91535] plugins_configure vpn (execute task : ipsec_configure_do(,wan))
2021-06-19T16:47:19 kernel pflog0: promiscuous mode enabled
2021-06-19T16:47:19 kernel pflog0: promiscuous mode disabled
2021-06-19T16:47:19 kernel
2021-06-19T16:47:19 opnsense[91535] plugins_configure vpn (,wan)
This happens every boot, no exceptions.
Maybe this is related to two OpenVPN clients configured.
How to fix this? What else to check?
Any ideas what to try?
Why I see "error in configd communication" each boot?
Is it related to OpenVPN clients?
Well, if this is OpenVPN related why not check the OpenVPN logs?
Cheers,
Franco
Your gateway is apparently telekom, might be useful to know which kind of internet access you use. And the logs of of the connection(PPPoE?)...
error in configd appears to be unrelated
https://forum.opnsense.org/index.php?topic=19348.0