Print Page - Port forward rule created does not do automatic firewall rule

Title: Port forward rule created does not do automatic firewall rule
Post by: Samplex on May 27, 2021, 02:47:57 PM

When i create a port forward rule there is no automatic firewall rule created.

When i created it manaully the port is still not open en blocked form the internet.

Im i missing something?

Title: Re: Port forward rule created does not do automatic firewall rule
Post by: Samplex on May 27, 2021, 05:45:35 PM

I created the Port forware rule no 5 times but there is no WAN firewall rule automatically created. Is this a bug?

Title: Re: Port forward rule created does not do automatic firewall rule
Post by: thogru on May 27, 2021, 07:19:25 PM

Hi Samplex,

I am running:
OPNsense 21.1.5-amd64
FreeBSD 12.1-RELEASE-p16-HBSD
OpenSSL 1.1.1k 25 Mar 2021

When I created a forward rule I usually changed the last two settings of a rule:

NAT reflection
If not enabled I cannot test out from my local network to the public IP address.
Filter rule association
If I do not set this to PASS no firewall rule will be created. The created firewall rule is invisible within the firewall configuration.

Kind Regards
Thomas

Title: Re: Port forward rule created does not do automatic firewall rule
Post by: Samplex on May 27, 2021, 10:34:58 PM

Hello Thomas,

I got the same version

Every NAT rule i make it not works.
Tried a lot of firewall brands but this is the first which don't work at all.

Maybe have to try pfsense or got back to my Ubiquiti router :(

Title: Re: Port forward rule created does not do automatic firewall rule
Post by: rhubarb on May 28, 2021, 04:07:41 AM

I do a port forward with an associated WAN rule and it works flawlessly. Try a WAN rule.

OPNsense Forum

English Forums => General Discussion => Topic started by: Samplex on May 27, 2021, 02:47:57 PM