Hi,
i´ve got this error all the time in my syslog
Processing event '!system=CAM subsystem=periph type=error device=da0 serial="20120926571200000" cam_status="0xcc" scsi_status=2 scsi_sense="70 02 3a 00" CDB="00 00 00 00 00 00 " '
I´ve found, that this could be an old error, and it should be fixed.
da0 is harddrive ?! In this post its a cdrom (https://forum.opnsense.org/index.php?topic=13611.0).
Its an ZOTEX TBOX CI329 nano.
Could anybody help?
sudo geom disk list
Geom name: ada0
Providers:
1. Name: ada0
Mediasize: 32017047552 (30G)
Sectorsize: 512
Mode: r1w1e3
descr: TS32GSSD370S
lunid: 57c3548159c79830
ident: E801220144
rotationrate: 0
fwsectors: 63
fwheads: 16
Geom name: da0
Providers:
1. Name: da0
Mediasize: 0 (0B)
Sectorsize: 512
Mode: r0w0e0
descr: Generic- SD/MMC/MS PRO
lunid: 00e04c2020202000
ident: 20120926571200000
rotationrate: unknown
fwsectors: 0
fwheads: 0
sudo camcontrol devlist
<TS32GSSD370S P1225CH1> at scbus0 target 0 lun 0 (ada0,pass0)
<Generic- SD/MMC/MS PRO 1.00> at scbus2 target 0 lun 0 (pass1,da0)
OPNsense 21.1.5-amd64
Greets
Byte