Hi,
I have an external freeradius server setup and I can authenticate just fine from opnsense.
I get the following response:
(2) Sent Access-Accept Id 66 from 172.31.254.103:1812 to 172.31.254.1:18478 length 0
(2) Tunnel-Type = VLAN
(2) Tunnel-Medium-Type = IEEE-802
(2) Tunnel-Private-Group-Id = "101"
(2) Framed-Protocol = PPP
(2) Framed-Route = "172.16.1.0/24"
But opnsense seems to ignore the Attribute-Value Pairs.
Is is possible to use Attribute-Value Pairs for external freeradius to lock a user into a specific network and VLAN ID?
/Klavs
No, this is mit supported, sorry.