OPNsense Forum

Archive => 21.1 Legacy Series => Topic started by: k356g on March 25, 2021, 01:56:37 PM

Title: [Solved] My plugins is empty
Post by: k356g on March 25, 2021, 01:56:37 PM
Dear All

Please help me. Why my plugins is empty?
I try to updated system, but still can't work

I enabled System > Settings > General : Prefer IPv4 over IPv6, but doesn't work.

(https://upload.cc/i1/2021/03/25/ABjnuq.png)


Thank you for the help.
Title: Re: My plugins is empty
Post by: Inxsible on March 25, 2021, 03:45:31 PM
Quote from: k356g on March 25, 2021, 01:56:37 PM
I try to updated system, but still can't work

I enabled System > Settings > General : Prefer IPv4 over IPv6, but doesn't work.
What does "doesn't work" mean? Did you get any errors? If so what were they?
Have you checked if you are connected to the internet? Have you tried pinging a URL and are you getting a response back?
Title: Re: My plugins is empty
Post by: verasense on March 25, 2021, 07:57:55 PM
This happened to me when I had no Internet connection.

Verify these:

1 - DNS is OK
Services - Unbound DNS - General - Enable Unbound (checked) and Enable Forwarding Mode (checked).
System-Settings-General-DNS servers (e.g. 1.1.1.1, 8.8.8.8  use gateway WAN).

2 - Correct Gateway
Systems - Gateways - Single
"Upstream Gateway" in WAN
Title: [Solved] My plugins is empty
Post by: k356g on March 26, 2021, 02:39:48 PM
Quote from: verasense on March 25, 2021, 07:57:55 PM
This happened to me when I had no Internet connection.

Verify these:

1 - DNS is OK
Services - Unbound DNS - General - Enable Unbound (checked) and Enable Forwarding Mode (checked).
System-Settings-General-DNS servers (e.g. 1.1.1.1, 8.8.8.8  use gateway WAN).

2 - Correct Gateway
Systems - Gateways - Single
"Upstream Gateway" in WAN

Dear Sir

Thank you really. Solved.
Title: Re: [Solved] My plugins is empty
Post by: Inxsible on March 26, 2021, 05:04:11 PM
Just a note that even though the provided solution worked for the OP, it may not be a solution for everyone.

For eg. If you are not using Unbound as a forwarder and you encounter the same DNS issue, you will have to figure out a different way to get your DNS fixed.