OPNsense Forum

Archive => 21.1 Legacy Series => Topic started by: madj42 on January 20, 2021, 03:25:47 PM

Title: dpinger and PPPoE gateway
Post by: madj42 on January 20, 2021, 03:25:47 PM
System > General Log:

2021-01-20T08:14:50   opnsense-devel[44539]   /status_services.php: The WAN_PPPOE IPv4 gateway address is invalid, skipping.   
2021-01-20T08:14:50   opnsense-devel[44539]   /status_services.php: Choose to bind WAN_PPPOE on Array since we could not find a proper match.

System > Gateways Log:
2021-01-19T16:46:41   dpinger[27392]   send_interval 1000ms loss_interval 2000ms time_period 60000ms report_interval 0ms data_len 0 alert_interval 1000ms latency_alarm 500ms loss_alarm 20% dest_addr 207.109.2.20 bind_addr 98.115.111.122 identifier "WAN_PPPOE "

This is after upgrading from 20.7.8 to 21.1r1.   Internet and everything else works fine but the dpinger service will not start and the dpinger service won't start.  The WAN_PPPOE gateway is also marked as offline.  I can reach the gateway from the router and a client.  I've tried setting far gateway, upstream gateway, and a monitor IP with no avail.  If it helps, I wasn't getting anything like this on the 20.1 and 20.7 series.  I know this is a beta and issues like this are expected so I'm fine with helping troubleshoot this or being patient.  Just wanted to report it.
Title: Re: dpinger and PPPoE gateway
Post by: franco on January 20, 2021, 03:27:17 PM
Version please, is this development?


Cheers,
Franco
Title: Re: dpinger and PPPoE gateway
Post by: chemlud on January 20, 2021, 03:35:16 PM
Quote from: madj42 on January 20, 2021, 03:25:47 PM

This is after upgrading from 20.7.8 to 21.1r1.


...
Title: Re: dpinger and PPPoE gateway
Post by: madj42 on January 20, 2021, 07:52:13 PM
It's on 21.1r1.
Title: Re: dpinger and PPPoE gateway
Post by: madj42 on January 20, 2021, 07:55:23 PM
Just realized there is an r44 version showing available and maybe I didn't update all the way through to the latest.  I can try doing this later and report back.
Title: Re: dpinger and PPPoE gateway
Post by: franco on January 20, 2021, 08:17:49 PM
Yeah, thanks, just needed to be sure. :)

You can switch to 21.1.r1_xx production track where the problematic code doesn't exist or stay on development track and use this patch[1]:

# opnsense-patch 96b34bb506


Cheers,
Franco


[1] https://github.com/opnsense/core/commit/96b34bb506
Title: Re: dpinger and PPPoE gateway
Post by: madj42 on January 21, 2021, 04:32:57 AM
Switched to the production branch and that indeed fixed the issues.  Thanks.
Title: Re: dpinger and PPPoE gateway
Post by: franco on January 21, 2021, 08:57:48 AM
No problem, thank you for the report!


Cheers,
Franco