The recently. changed reporting traffic page lost some features.
You used to be able to easily identify heavy traffic users with individual graphs, now that's gone.
The smooth graph looks pretty, but it's a lot less useful for dealing with user situations.
So I 'd prefer something more like the old one.
Erick
A similar feature will come with one of next releases
20.7.8, it's back:
https://pasteboard.co/JKwHo7B.png
Does the interface selection / filter work?
In the attached pic only IOT is selected, but SRV is displayed too.
Yes it does, but don't deselect ALL interfaces, it gets upset.. :)
I already noticed that (deselect).
But as shown in my screenshot a not selected interface is displayed :(
ya, filtering isn't working on the top talkers tab
looks like filter is working. on API request. just not removing strings from table. string should disappear after TTL (2min)
API error on empty filter already fixed by @AdSchellevis (0ae7e39)
Is the Reporting/Traffic aspect going to progress to where it was before or better?
OPNsense protects my home network which has about 50 plus devices behind it, any of which can be happily chewing my 100Mbit/20Mbit bandwidth for random reasons and ruining my experience.
Its a pretty simple configuration currently with a WAN and a LAN interface.
I had a specific need for the Traffic view to be able to quickly see what internal device is consuming my internet traffic.
This is not easily achieved anymore for me and I honestly do not actually see who could make good use of this new look.
My process would be:
Internet is slow for users
Log into OPNsense appliance and check Reporting/Traffic usage
If WAN usage is 100%
Top device in the list is usually the fault
Either complete further analysis using OPNsense or go directly to the device
Both the Graph and Top Talkers does not seem to help me with this.
I'm running the latest 20.7.8