Hi,
i updated to OPNsense 20.7.6 since some days. I have a strange problem with OpenVPN in Client Mode.
The OPNsense connects to a VPN Provider (Private Internet Access in my case) as Client.
The VPN Tunnel is established and i traffic goes trough. So there is no problem.
But in the GUI i have the message "Unable to contact daemon Service not running?"
The VPN Tunnel is shown as down - but it isn´t.
Here are some screenshots
(https://s12.directupload.net/images/201216/temp/3y6xnl4t.jpg) (https://www.directupload.net/file/d/6034/3y6xnl4t_jpg.htm)
(https://s12.directupload.net/images/201216/temp/sljt6h3x.jpg) (https://www.directupload.net/file/d/6034/sljt6h3x_jpg.htm)
(https://s12.directupload.net/images/201216/temp/tmvdvnux.jpg) (https://www.directupload.net/file/d/6034/tmvdvnux_jpg.htm)
(https://s12.directupload.net/images/201216/temp/qlvx88gq.jpg) (https://www.directupload.net/file/d/6034/qlvx88gq_jpg.htm)
Directly after a reboot everything is fine and up in the GUI. Looks like the behavior starts after a reconnect in the night (by my Internet Provider (Telekom))
I´m running OPNsense inside a Proxmox VM with Intel Network Cards (successfully since 2 years)
Any logs needed ?
Any hints ?
Thanks for your help!