Text only | Text with Images

OPNsense Forum

Archive => 20.7 Legacy Series => Topic started by: saki22 on November 11, 2020, 07:18:28 PM

Title: Wan PPPoE mtu problem
Post by: saki22 on November 11, 2020, 07:18:28 PM
the auto on the mtu incorrect values the only fix the mtu by input mtu values by manual
username and password have be remove on the pic
Title: Re: Wan PPPOE mtu problem
Post by: saki22 on November 11, 2020, 09:57:31 PM
is know prb or gltch is this probably going to be fixed in feature release
Title: Re: Wan PPPoE mtu problem
Post by: mimugmail on November 12, 2020, 11:46:01 AM
Dont understand the problem here, what is mit working?
Title: Re: Wan PPPoE mtu problem
Post by: saki22 on November 12, 2020, 12:05:15 PM
If you look at the screenshot mtu it says the calculation ppp MTU that is the wrong value
Title: Re: Wan PPPoE mtu problem
Post by: mimugmail on November 12, 2020, 02:45:46 PM
When you remove 1492, does this value change?
Title: Re: Wan PPPoE mtu problem
Post by: saki22 on November 12, 2020, 03:15:34 PM
Yes it goes back to the wrong value
Title: Re: Wan PPPoE mtu problem
Post by: mimugmail on November 12, 2020, 03:37:16 PM
Can you send a screenshot with blank field and saved?
Title: Re: Wan PPPoE mtu problem
Post by: saki22 on November 12, 2020, 08:25:41 PM
some reason it fix it self I have tried to recreate the same scenarios for this error but I cannot recreate it it must be a random error if this happens again I will post a screenshot
Text only | Text with Images