Hello.
I have a question about the correct Web Proxy configuration.
Version of OPNsense - 20.7.3
I read the setup instructions - Documentaion/wiki
My workflow for setting up
1. Services-Web Proxy-Administration-General Proxy Settings: Enable proxy check.
2. Services-Web Proxy-Administration-Authentication settings: Authentication Method - Local Database.
3. System-Access-Groups: created a new group.
4. System-Access-Users: added two new users.
5. System-Access-Groups: added users to a new group.
6. System-Access-Tester: both users test passed.
7. Firewall-Rules-LAN: added two rules to block http/https bypass.
8. Save settings and restart services.
9. Configured the computer to use a proxy, correct ip-address and port number.
When connecting computer to the Internet via a proxy, with correct username & password - I don't pass verification & don't get access to the Internet.
Please help me. What I'm doing wrong?
hello rgza,
Does the proxy work like intended (HTTP/S) when you disable authentication?
If so I'd go to Firewall logs and search if the authentication is being blocked by the firewall and open the assosicated port.
Thank you.
If a username with a capital letter - authentication fails.
If a username with all small letters - authentication pass.
I have read way too many documents on setting up web proxy and have never gotten it to work. Is the wiki the best source, as I have also read this: https://www.tcptechs.com/opnsense-transparent-caching-filtering-proxy-with-virus-scanning/, but this was written on the v17 platform.
I wouold love to see an updated document, to get this right.