Hello, i have dhcp running o my lan
when i receive the ip adress (136.***.***.225) on a client i can access the intenet inside the client
but i have a problem i cant figure it out
i have a webserver running on port 9999
but the firewall is blocking it
if i disable the firewall temporarily i can access the port 9999
i tried many options in lan rules but nothing worked
how can i create a rule to allow access to port 9999 for the lan dhcp ip ?
(https://i.ibb.co/jGnRWvm/image.png)
Hello . first start using a class of private ip for the lan.
How would i do that ?
any example
10.0.0.0 - 10.255.255.255
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255
Hello, i dont understand
do i have to change my lan ip with one of those ips ?
you are not using proper lan configuration because you are not using private ip. start configuring the LAN better
can you be more specific pls
im not a expert
For ex. 192.168.10.1/24
Dhcp start from 192.168.10.100
And 192.168.10.200
Inviato dal mio iPhone utilizzando Tapatalk
i have a subnet 29 from hetzner
i am not running this on my local pc
if i use the private ip how am i supposed to serve my website to the public ?
it is not easy if you have no experience, you must know nat and portforwarding. I did not understand well, did you give your webserver a public ip? can you detail your configuration?
i am running opnsense as a virtual machine in proxmox
i have a additional ip 148.***.***.158 for WAN
and i have a subnet 136.***.***.224/29 for LAN
both are configured as static
the LAN ip is using the first ip of the subnet 136.***.***.224
so i am accesisng the gui using 136.***.***.224 on LAN
then i have enabled DHCP on LAN
with start 136.***.***.225 to end 136.***.***.230
so when i create a ubuntu desktop virtual machine i can obtain an ip from opnsense
and i can browse the web with the obtained ip inside ubuntu virtual machine
but the ubuntu cant be pinged from outside because firewall blocks it unless i disable the firewall
so there should be some rule to setup but i tried so many rules and nothing helped
opnsense by default has no traffic blocks on the lan, all traffic is allowed. sorry but I still don't understand. the ip you are using for the lan were provided by a provider? are ip public?